We spent many hours on research to finding 120mm fan duct cooling shroud to 4 inch, reading product features, product specifications for this guide. For those of you who wish to the best 120mm fan duct cooling shroud to 4 inch, you should not miss this article. 120mm fan duct cooling shroud to 4 inch coming in a variety of types but also different price range. The following is the top 9 120mm fan duct cooling shroud to 4 inch by our suggestions
857 reviews analysed
1. Antminer S9 T9 L3+ E3 X 3 D3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (2 Pack)
This vent shroud is designed to be directly mounted to 120mm cooling fans, as found on the AntMiner miner models S15, T15, X3, E3, S9, T9, L3, D3, A3 and others. Mounting the shroud to your AntMiner allows you to ventilate or cool your miner with a standard 4 inch dryer vent duct. Removing hot air from your AntMiners environment is one of the most important and easiest ways to keep your mining equipment cool and operating efficiently! This shroud will mount to your AntMiner with the existing screws. There is no need to purchase longer screws as required with other shrouds. This shroud also includes ridges on the 4″ inch connection port to ensure proper clamping of exhaust hoses to prevent leaking and hoses being accidentally detached. These ridges are not present on other shroud models available. A hose clamp is included with each shroud. This shroud can be used as an intake to direct cooler external air to your miner or as an exhaust to remove the hot air from our miner to another area. This is a custom engineered vent shroud brought to you by the team at ArcMyn. Compare our quality to other shrouds and you will find no comparison. Our shrouds are made from high temperature resistant injection molded ABS plastic that can withstand temperatures up to 221 degrees F (105 degrees C)! BEWARE listings that do not specify ABS plastic! Competitors use PLA plastic that will begin to melt and deform at 140 degrees F (60 degrees C)! We have observed miners increasing intake air temperature by over 40 degrees F! These temperatures can easily deform PLA printed shrouds causing exhaust blockages and over-heating! Don’t risk your expensive equipment with inferior products!
2. Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 5 Inch Vent Hose
This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. These will fit most ASIC miners, including DragonMint and Whatsminer M10. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 5 in vent hose and to keep air moving. This 5 inch design will have more efficient and better airflow than the 4 inch design! These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 5 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.
This product is custom designed and manufactured by Tinker3D. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.
*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.
3. Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (15)
Antminer S1 S3 S5 S7 S9 T9 L3+ 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose Extra thick for overclocking made in the USA fits Bitmain – S9, S9I, S9J, L3+, L3++, D3, A3, X3, E3, Z9, Z9 mini, E3, V9, S7, S1, T9, T1, X11, D9, S3, B3, S9 Innosilicon – A4, A4+, A8+, S11, A9, A5, 2X, T2, A2, D9 Dominator, Siamaster, Dashmaster, DecredMaster, ZMaster Dragonmint –D9, B29, T1, 16T,
4. Coolerguys Thermal Plastic Duct with End Caps for Electronics and Crypto Mining (92/120mm Fan/4" 7-30")
Coolerguys Flexible Vent Duct Tubing with 120mm Fan End Caps
Extremely easy and simple to work with!
This is a great way to vent your airstream where you need it. This tubing is completely flexible for placement around and through intricate cabinet work or through computer case obstacles. The flexible venting can be easily removed and repositioned by just snapping the tubing together and resetting the bend and length to desired position. Once in the desired position the tubing keeps it shape until re-snapped to the starting position.
Both ends of the tube are caped with plastic 120mm fittings for attachment of standard 120mm fans.
Available in size lengths.
Small: 7 inches to 30 inches
Material: Plastic ends / Neo plastic covered wire spring
5. TerraBloom 4" Inline Duct Fan, Quiet Energy Saving EC Motor with 0-100% Adjustable Speed Controller. 160 CFM, 18W.
- BIG ENERGY SAVINGS: Built with new generation EC motor our new 4″ ECMF series fans deliver 160 CFM of airflow using only 18 Watts. That’s over 80% power cost savings over AC motor based fans producing same airflow and pressure using 100+ Watts. With 12 hours of daily use this fan fully pays for itself in energy savings in less than 12 months.
- QUIET & FULLY ADJUSTABLE: Using included controller this fans’ speed can be adjusted from 0%-100% without creating any additional hum or noise. See the video in this product’s listing showing actual sound output at various speeds
- AIRTIGHT ALUMINUM HOUSING: Resists accidental damage, harsh elements and reduces maintenance in demanding applications such as ventilation of grow tents, gardens, farms, crawl spaces, attics, etc
- COMPACT DESIGN: : Only 6.25″ (L) x 7.25″ (W) x 5.9″ (H). Ideal for applications with minimal space available. Installation hardware (screws and anchors) included in set
- ETL LISTED WITH 2 YR WARRANTY: ECMF series fans are ETL listed and Conform to UL standard 507, Certified to CSA Standard C22.2 No 113. Covered by 2 year warranty
6. Antminer Antminer A3 D3 E3 S1 S3 S5 S7 S9 V9 T9 L3+ x3 Z9 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose (Qty 15, black)
Antminer Fan Duct Shroud to connect 5 inch vent hose Improved airflow compared to 4 inch design Designed to fit standard 120mm fans using existing screws Made in USA and 3D printed using PLA Perfect item to keep temperatures low and increase mining efficiency
7. TerraBloom ECMF-150, Quiet 6" Inline Duct Fan with 0-100% Variable Speed Controller, Air Tight Metal Casing, Energy Efficient EC Motor. Heating, Cooling Booster and Exhaust Blower for Grow Tents
- Powerful airflow and extreme energy efficiency – ECMF series 6” inline fans are perfect for heat and humidity exhaust in grow tents, heater and AC duct booster and odor control applications.
- Built with aerodynamically optimized mixed-flow impellers in a compact, air tight metal casing and powered by a fully speed adjustable EC motor.
- Each fan comes with a wired variable dial speed controller, AC power cord and mounting hardware.
- Newly upgraded version supports PWM, 0-10VDC and potentiometer speed signals for integration with building management systems, smart/thermal/humidity controllers and other optional equipment.
- Duct Diameter: 6” * Airflow: 350 CFM * Power 40W * Noise: 31-60 dBA * Pressure: 500 Pa * Bearings: Dual Ball * Size: 7.3 x 4.9 x 6.9 in. * ETL Listed
8. AC Infinity RACK ROOF FAN KIT, Quiet Dual-Fans with Speed Controller, for cooling AV, Home Theater, Network 19” Racks
- A quiet fan kit designed for standard 19” racks, to be mounted on the roof or to replace existing fans.
- Features a speed controller utilizing PWM which can control the fan’s speed without generating noise.
- Compatible with CLOUDPLATE series rack fans and can be linked to share the same programming.
- Heavy-Duty steel construction with spiral fan guards, mounting hardware, and power adapter.
- Size: Standard 120mm Rack Fans | Fans: 2 | Airflow 200 CFM | Noise: 26 dBA | Bearings: Dual Ball
A quiet dual-fan kit designed to be mounted onto the roof of standard 19-inch racks to provide cooling. Containing standard 120mm fans, it can also replace existing fans that may been included with your rack. Maintaining an optimal temperature for rack-mount equipment prevents overheating, ensures constant performance, and extends their lifespan. Features an inline speed controller utilizing PWM-technology. The fans are housed in heavy-duty cold rolled steel with spiral fan guards. Fans contain dual-ball bearings rated at 67,000 hours, and are certified by CE and RoHS. This complete kit includes two fans, an inline speed controller, rack-roof mounting screws, corded 6-ft power adapter, and user’s manual.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory.
Performance and Applications
This rack roof fan kit contains standard 120mm fans, enabling it to be compatible with most standard 19” racks. With a noise level of 26 dBA, the fan system can be used for environments where low or minimal noise is required such as home theater, studio, DJ, and audio video racks. A max airflow rating of 200 CFM will provide sufficient cooling to server, network, IT and equipment racks requiring high airflow.
9. Tinker3D Antminer S7 S9 S9i E3 T9 L3+ D3 A3 V9 X3 120mm Fan Duct Cooling Shroud to 4 Inch Vent Hose
“This custom designed fan duct was specifically created for Antminer bitcoin miners, but will work with any 120 mm fan. As miners, we know how important it is to cool mining equipment and keep temperatures low. Just replace the fan guard with our fan duct using your existing screws and see results immediately. The duct was designed to fit standard 4 in vent hose and to keep air moving. These shrouds are 3D printed using ABS plastic, which is a durable thermoplastic and able to handle to high temperature produced by mining equipment. Does not include 4 in vent hose or clamp. Will not work with Antminer S7 single fan design. Depending on color availability, item may be black or blue.
This product is custom designed and manufactured by MG3D Designs. We have worked hard to develop a quality and durable product. Please be aware of other sellers because we can not guarantee their build quality or material. Often times other sellers will use PLA, which is inferior to ABS and can pose a fire risk.
*Antminer is a registered trademark of Bitmain Technologies. We are not affiliated with Bitmain Technologies.”
By our suggestions above, we hope that you can found 120Mm Fan Duct Cooling Shroud To 4 Inch for you.Please don’t forget to share your experience by comment in this post. Thank you!