974 reviews analysed
1. 3D Printer Silicone Heated Pad, Heating Plate 310x310mmx1.5mm, 120V 750W for Creality CR-10 /CR-10S 3D Printers Heater Bed with Screw Holes /3M Adhesive
- Wonderful silicone heater for Creality CR-10 /CR-10S 3D printer build plate heating.
- Rated at 5 watts per square inch with fast and even heating
- Equipped with NTC 100K thermistor (Beta 25/50 3950K-1%) as temperature control sensor which is supported directly by Marlin firmware.
- 3M adhesive backing offers excellent and easy mounting onto most surfaces.
- Versatile and may be used in many other applications.
2. 20 Pieces Yellow Heating Bed Spring Die Head Spring 3D Printer Compression Spring 0.31 in OD 0.78 in Length, Compatible with Creality CR-10 10S S4 Ender 3 Heating Bed Spring Bottom Connection Level
- Compatibility: theses heated bed springs are compatible with most 3D printer heating beds, Ender 3, Ender 3 pro hot bed springs, flat top and hard springs
- Compression springs size: aperture (OD): 0.31 inch/ 8 mm: Rod diameter (ID): 0.16 inch/ 4 mm
- Length: 0.78 inch/ 20 mm, proper size to use
- Yellow spring: according to the different types of load, the yellow spring is the lightest load, harder than normal spring, this can help your 3D printer print more stable and firm, better keep the printing pad level
- Functions: these heating bed springs commonly apply to hold 3D printer bed, and are primarily applied in die machinery, also suitable for a variety of other applications
- Note: there are many small parts in the bag
- Please keep them away from children for safety
20 Pieces yellow heating bed spring die head spring 3D printer compression spring 0.31 in OD 0.78 in length, compatible with Creality CR-10 10S S4 Ender 3 heating bed spring bottom connection level
These yellow bed springs are compatible with most 3D printer heating beds, Ender 3, Ender 3 pro hot bed springs, flat top and hard springs.
Load class: light load
Size: hole diameter (OD) : 0.31 inch/ 8 mm, rod diameter (ID) : 0.16 inch/ 4 mm, length: 0.78 inch/ 20 mm
20 x Yellow die spring
In general, there are yellow, blue, red, green, brown spring according to the different load classification, mold spring is mainly applied in mold machinery. For the mold spring, the yellow here indicates the load class is light load which is very suitable for high stress applications, but also for a variety of other applications.
The brands or models we mentioned are only for expressing products adaptability, not for trade mark using, our trade mark is Mudder, kindly noted.
There are many small parts in the package. For the sake of safety, keep away from children.
Due to the different screen brightness and brightness, the actual color of the project may be slightly different from the picture shown on the website, please understand, but it does not affect the use of the function.
3. Signswise 200x200mm 12V 220W Silicone Rubber Heating Heater for 3D Printer Heated Beds
4. SIMAX 3D-Printer Heated-Bed Platform,Heating-Plate 24V/12V Changeable 235x235x3mm Aluminum Hot Bed for Ender3,CR10, Updated Version of MK2B & MK2A,Black
- ✔️【Stable Performance】The whole board full gold process, the cost is much higher than the spray tin plate,more slight, thin, stronger, excellent thermal conductivity and heat resistance
- ✔️【Quality Assurance】The new circuit, power supply power stability,safer to use, better print quality and more stable performance.
- ✔️ 【Easy Install】Easy to use and install, has a long service life,the vacancy is a counterbore and the mounting screws will not protrude.It is a prefect accessory for 3D printer.
- ✔️【No Need Glass】The whole board after optical short circuit, open circuit detection，3mm thick aluminum substrate is used, the heatbed and the aluminum plate are combined into one, no need to add glass.
- ✔️【100% QUALITY ASSURANCE】1-Year Warranty, if you are not satisfied with the product, please contact us in time, we will solve your problem within 24 hours and provide a 1-year warranty.
Thermistor length: 1m
Cable length: 1M / 3.3in
Support voltage: 240w 24V DC
DC24V: 130℃, 411W
Heating Area: 235 x 235mm
Item weight: 900g / 2.0lb
Package weight: About 1000g / 2.2lb
Heating bed cable description:
1. Project type: hotbed line for 3d printer
2. Applies to: All CR-10 3D printers.
CR-10 3D printer heater supports 24V power supply
Due to the different measurement methods, the size will be a bit error, the error is about 1mm, the actual measurement shall prevail.
24V wiring method: Weld Number 2 for positive, Number 3 for negative, 1 is empty
1 * Aluminum Heatbed
1* 1m Cable
5. BCZAMD 3D Printer Heating Controller MKS MOSFET MOS Module for Heatbed Extruder Print Head Heat Bed Mosfet Module Exceed 30A
- Each Heatbed Mosfet function has been tested.
- You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards.
- Excellent performance MOS tube (nominal maximum current 280A).
- Large heat sink, the maximum current can be up to 30A. Can use 5-24v digital signal to control.
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineers of technical team will always support you here.
The MOS module is manufactured with premium material for durable and long lasting use. This high power module is a general add-on heated bed power expansion module for 3D printer.
Equipped with large heatsink, the maximum electric current is above 30A. You can use Ramp1.4 or heatbed of MKS mainboard directly to output signal control.
1.Power is connected to the power supply, pay attention to positive and negative.
2.Hotbed connected to the hot bed heating line, pay attention to positive and negative.
3.Digital control signals can be connected to Gnd and D8 directly.
4.Connect the control signal from the Ramps1.4 or MKS motherboard MOS tube to Bed.
5.The two sets of control signals can only be connected to one group.
1 x Heat Bed Mosfet Module
6. Aibecy Anet 3D Printer Hot Bed Base Plate Heating Platform Heatbed Aluminum Plate Size 220 220 3mm with Cable Hot-Bed Wire for Anet A8 A6 A2 TRONXY P802M 3D Printer Upgrade Suppliers 12V(1pcs)
- The plate is used as a perfect replacement accessory for 3D printer, to guarantee the efficient operation the 3D printers.
- The hot bed plate is suitable for Anet A8/ A6/ A2, TRONXY P802M and other adaptive 3D printers.
- Come in size 220 * 220 * 3mm, easy and quick to install, strong and durable.
- Comes with a connection wire, the length of wire is about 87.5cm / 34.4in.
- The plate is made with high quality aluminium alloy material, with great heat performance, do not worry about printing warping edge problem.
The plate is used as a perfect replacement accessory for 3D printer, to guarantee the efficient operation the 3D printers.
The hot bed plate is suitable for Anet A8/ A6/ A2, TRONXY P802M and other adaptive 3D printers.
Come in size 220 * 220 * 3mm, easy and quick to install, strong and durable.
Comes with a connection wire, the length of wire is about 87.5cm / 34.4in.
The plate is made with high quality aluminium alloy material, with great heat performance, do not worry about printing warping edge problem.
Main Material: Aluminium Alloy
Suitable: For Anet A8/ A6/ A2
Cable Length: 87.5cm / 34.4in
Plate Size: 220 * 220 * 3mm
Product Voltage: 12V
Product Power: 120W
Package Size: 34.5 * 33 * 4.5cm / 13.6 * 13 * 1.8in
Package Weight: 662g / 23.4oz
Still hot after powered off!
Please keep away from children.
1 * Heatbed Plate
1 * Heatbed Cord
7. 510x510mm Silicon Heated Bed for CR-10S5 3D Printer with Digital Temperature Controller Heating up to 100°C Within 10 Minutes
- Heat the build bed to 100°C within 10 minutes,maximum heating to 120°C
- With Digital temperature controller ,set heating temperature freely
- Independent power plug, not connect to motherboard, so protect motherboard from burning
- Stick to original heated bed directly, easy to use
- Position hole is the same as original heated bed
* With independent temperature controller .need plug with independent power * Size: 510-510mm suit for CR-10S5.
*Power consumption :Maximum power 1200W
*The maximum heating temperature 120C（Celsius Degree）
* The back with 3M adhesive glue, can directly stick to the heated bed. need disassemble the S5 bed before assemble it
* The heated bad Maximum temperature resistant is 200C, long term working temperature condition is under 180C
* This is 28 hole version, beyond 24 postion hole, extra 4 hole is for cooling
* To ensure safety , the plugs are 3 pins
* When use, please do some test to find a suitable temperature for you to use, for example, when heating pad working , if you want heat the bed to 100C, please set the silicon heater to 75-80C, no need to set to 100C, for the printer itself can heat too. this can save electricity cost and environment friendly
8. USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)
- high temperature silicone heater pad for Creality CR-10 S4 3D printer
- This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
- With 1.2meter NTC 100K 3950 thermistor for temperature Control (Choose Number 1 in the Marlin firmware)
- Please DO NOT POKE NEW HOLES for this bed as the whole pad is a circuit, so it will 100% damage the circuit if you poke new holes anywhere
- Important Notes: Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
Backing:3M adhesive backing
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control.
Power consumption: 1000W.
Attached with two pieces 1.2meter length power wire
9. Creality 3D Printer NTC Thermistor Temp Sensor 100K for Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S
Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.
10. FYSETC 3D Printer Parts and Accessories, 120X120 mm/4.7"X4.7" 12V 120W Silicone Heater Hotbed Mat Heated Bed Pad with NTC 100K Thermistor 3M Adhesive Backing for Reprap Davinci Mini V2 3D Printer
- Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.
- Size: 120X120 mm/ 4.7X4.7 inch, Power: 12V 120W. Work well for Mono price Mini V2 3d printer
- Easy to mount, the backing comes with 3M Adhesive.
- Please heat only when after it’s mounted onto the build plate (Aluminum plate recommended).
- After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
● Applications for 3D Printer Heated Bed, food service equipment, airplane engine heaters, aerospace industry, drums and other
● Durable silicone rubber hot bed, best heater performance and the longest serving life, uniform heat transfer;
● Work well in especially at high temperatures or in long time heating process.
● Moisture proof and chemical resistance
Suggest working temperature: -62～200℃
Please Note: the silicone mat’s temperature will heats up quickly, please take anti-scalding measures!
1 x 4.7 in Silicone Rubber Heater
By our suggestions above, we hope that you can found 3D Printer Heating Bed for you.Please don’t forget to share your experience by comment in this post. Thank you!