
597 reviews analysed
1. Electriduct D-2 Rubber Duct Cord Cover – 10 Feet Gray Floor Cable Protector
Feature
- Lay flat and easy to install – Order is for 1 piece of 10 feet.
- Made in USA – High Quality Solid Extruded Rubber | LAY FLAT INSTRUCTIONS: This product is made from high quality rubber, and like all rubber, it will take shape in time, but for immediate results, place in any warmer area: outside in sunlight, warehouse, garage, etc. The cord cover will become very pliable.
- Total Height: 3/4″
- Total Width: 3-1/4″
- Center channel: 1/2″H x 3/4″W / Slit Center
- Provides safe working environment | This is raw rubber, scuffing is natural and expected like all rubber products.
Description
*LAY FLAT INSTRUCTIONS: This product is made from high quality rubber, and like all rubber, it will take shape in time, but for immediate results, place in any warmer area: outside in sunlight, warehouse, garage, etc. The cord cover will become very pliable. The D-2 rubber cord protector shields wires, power cord(s), and CAT5 (Category 5) cable(s) making this a must for any standard computer station set-up. This cord protector comes SLIT on the center channel for easy universal installation for connected cables.
2. (4-Pack) 6.5 Feet Heavy Duty Cable Protector + Cord Cover – 3 Cord Channels – Durable Gray PVC is Flexible, Odor Free, Easy to Unroll – Conceal Wires at Home, Office, Warehouse, Workshop, Concerts
Feature
- SAFELY CONCEALS & SECURES UNSIGHTLY CORDS: Gray floor cord cover efficiently hides and protects cords, wires, and cables, helping to keep floor areas clear and safe. Flat exterior surface helps prevent tripping and allows wheels and carts to roll over smoothly. Anti-slip texture on the bottom prevents sliding on smooth floors. Each unit is 6.5 feet (2 meters) in length, and is 0.67 inches tall and 3.27 inches wide on the outside. Tape / adhesive not included.
- FLEXIBLE ODOR-FREE PVC MATERIAL IS EASY TO UNROLL & CUT: Floor cord protector is made of heavy-duty, flexible, black PVC. Unlike rubber floor cord protectors, this PVC version has no bad smell out of the box, is easy to unroll, and needs no additional treatment (heating, boiling) to lay flat. The PVC is easy to cut to any length with a knife or strong scissors. PVC provides extra insulation for speaker wires and home theater cables.
- SECURE MANY CORDS WITH THREE LARGE CHANNELS: Power and electrical cords, extension cords, coax cables, ethernet cables, and other wires can be stored securely in three deep channels. The middle channel (0.93 x 0.42 inches in size) holds up to five power cords or ten ethernet cables. Two side channels (0.75 x 0.39 inches) each hold one power cord or two ethernet cables. (Note: the three channels for this cord protector come unopened. They can be easily opened with scissors or a knife.)
- YELLOW STRIPES ON TOP FOR VISIBILITY AND SAFETY: Bright yellow stripes run along the length of the top of the cord protector so that it is safely visible. (Note: yellow stripes are non-reflective.)
- 4-PACK PERFECT INDOORS & OUTDOORS: Cable protectors and cord covers are suitable for offices, homes, workshops, warehouses, concerts / events, or outdoor settings. Slim size fits under furniture and along any surface or edge. Can be used as electrical cord protector or extension cord cover. This 4-pack bundle helps cover longer cords in any setting.
3. Durable Cable Ramp Protective Cover – 2,000 lbs Max Heavy Duty Cable & Hose Protector w/ Flip-open Top Cover & 5-Slot Multi-Channel Design – Cable Concealer for Outdoor & Indoor Use – Pyle PCBLCO28
Feature
- 5-SLOT MULTI-CHANNEL DESIGN: The protective cover comes in interlocking design to allow enough rooms for floor cables & power cords. It easily connects multiple for cable management in larger areas
- PROTECTIVE CABLE CONCEALMENT: Rugged, reliable & durable cable cover ramp that is sage and ideal for high “walking-traffic” areas. It comes in bright yellow color to provide high visibility & additional safety to passers-by
- ANTI-SLIP SURFACE: The cable protector comes in non-interfering style for wheels & carts to roll over with ease. This heavy duty cable ramp can be used in homes, offices, schools, stores & warehouses
- SUPERIOR WIRE PROTECTION: Efficiently provides superior protection for extension cords, power lines, hose & network cables. Comes with a flip-open top cover for hassle-free cable placement. Ideal for indoor and outdoor use
- 2000 LBS MAX LOAD CAPACITY: The cord concealer is made of highly durable engineered polyethylene material with a maximum thickness of 1.2”. It weighs only 29.54 lbs but boasts 2000 lbs max load capacity
Description
Pyle Model : PCBLCO28
Protective Cable & Wire Cover Ramp Track
Multi-Channel Cable Protective Cover Ramp, Cord/Wire Concealment Protection Track
Features:
Technical Specs:
Pyle Model: PCBLCO28 – Multi-Channel Cable Protective Cover Ramp – rugged, durable, reliable – protective cable concealment – bright & visible Yellow safety color – 5-slot, multi-channel design for running cables – safe in high ‘walking-traffic’ areas – Anti- slip textured surface – ability to cover multiple cables/wires/cords – non-interfering style allows wheels & carts to roll over – interlocking design allows for multiple connection lengths – perfect for power lines, extension cords, network cables, etc. – used in homes, offices, warehouses, stores, on-stage & more – extra rugged 2,000 lb. Max load capacity – maximum cable diameter/ thickness compatibility: 1.2” – construction material: heavy duty engineered polyethylene – Dimensions (L x W x H): 36.2’’ x 19.7’’ x 2.0’’ -inches.
4. Durable Cable Ramp Protective Cover – 2,000 lbs Max Heavy Duty Drop Over Hose & Cable Track Protector, Safe in High Walking Traffic Areas – Cable Concealer for Outdoor & Indoor Use – Pyle PCBLCO22
Feature
- PROTECTIVE CABLE CONCEALMENT: Rugged, reliable & durable cable cover ramp that is sage and ideal for high “walking-traffic” areas. It comes in bright yellow color to provide high visibility & additional safety to passers-by
- ANTI-SLIP SURFACE: The cable protector comes in non-interfering style for wheels & carts to roll over with ease. This heavy duty cable ramp can be used in homes, offices, schools, stores & warehouses
- 2000 LBS MAX LOAD CAPACITY: The cord concealer is made of highly durable engineered polyethylene material with a maximum thickness of 1.2”. It weighs only 5.67 lbs but boasts 2000 lbs max load capacity
- SUPERIOR WIRE PROTECTION: Efficiently provides superior protection for extension cords, power lines, hose & network cables. The cable concealer is ideal for indoor and outdoor use
- EASY CABLE MANAGEMENT: The protective cover comes in interlocking design to allow enough rooms for floor cables & power cords. It easily connects multiple for cable management in larger areas
Description
PylePro Model : PCBLCO22
Cable / Wire Cover Ramp Track
Cable Protective Cover Ramp, Cord/Wire Concealment Protection Track, Extra Wide
Features:
The Pyle ‘PCBLCO’ Cable Ramp Track Covers provide safe and reliable cord and wire management. Made from heavy duty engineered construction, these cable protectors add safety and comfort in any environment — indoors or out! The bright yellow color makes the system clearly visible and the anti-slip textured surface can handle the stresses of high-traffic public areas. The extra rugged construction has an impressive 2,000 lb. load capacity and the non-interfering design allows carts and strollers to roll right over. Interconnect multiple tracks for cable management in larger demanding areas. Keep your equipment safe and allow everyone to pass-by with the Pyle ‘PCBLCO’ Protective Cable & Wire Concealment Ramps (sold as single track).
5. pioneer air conditioner Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps – WYS-LCVR-KIT
Description
Finish up your ductless mini splut unit installation for a professionally installed look. Protects the line set, wiring and drainage lines from weather and other elements. Can be added on to new or existing installations. Suitable for 9000, 12000, and 18000 BTU systems. Parts included : a. Three straight lengths of 32 inches each. b. Two different types of 90 degree elbows. c. One wall cap for entry point. d. One reducer, and two couplings. e. One 20” flexible length, for condenser connection. f. One 24” flexible length. g. Plastic anchors, screws and cable ties. h. Total coverage up to 13 feet.
6. REACH AUTO PARTS Universal Car Seat Heater 12 Volt Heated Car Seat Cover Heated Pad 24 Volt Truck Heating Seat Cushion Winter Warmer Blanket Long Cable for Left and Right Hand Drivers
Feature
- 3 Minutes Fast Warm Up: This heated car seat cover heat up in 3 munites once turned on, fast, even and consistent heating bring a better driving experience in chilly winter.
- No Worries Left or Right Hand Driver: Approx 1.7m/5.6ft power cable within cigarette lighter adaptor, this heated pad is universal for different countries of car, suv, jeep, truck and van.
- Plug And Play: Simply plug it into your 12V/24V cig lighter and click the red button to adjust temperature range, warm your back and body immediately on the heating pad.
- Non-slip Car Seat Warmer: With small dimples on the back of the heated pad, easy to put on car seat. Elastic strap helps to fix at the car seat, not easy to slid down.
- 3 Years Warranty: REACH AUTO PARTS heated car seat cover offer 3 years free manufacturer warranty & 24 hours friendly customer service, gives you a warm guarantee in winter!
Description
Driving in cold weather can greatly affect driver safety, especially long-distance driving. REACH AUTO PARTS heated seat covers can effectively accelerate blood circulation in cold winter.
Multiple Safety Guarantees: Safe heating and built in overheat protection. The power cord plug is made of flame retardant material with built-in fuse to prevent short circuit.
Fast Heating: High quality heating wire for fast heat transfer, heat up in 3 minutes, enjoy immediate warmth at your seat in winter.
Easy To Install: Elastic straps with hook helps to fix cushion at the seat, with small dimples on the bottom, hard to slid down.
Plug And Play: Simply plug it into your 12V/24V cigarette lighter and adjust temperature range, high/middle/low as you like.
No Worries Left or Right Hand Driver: Approx 1.7m/5.6ft power cable, it is universal for different countries of car, suv, jeep, truck and van.
Note: The cushion will turn off after 50mins continuous heating to prevent electric waste.
Usage Method:
1. Hange the straps on the seat to fix the cushion at the seat.
2. Insert into the cig lighter port, the red light is on, the cushion is turned on.
3. Click the red button once, it is high temperature range. Click twice change to middle range. Click three times, low range, loop in turn.
3 Years Warranty: We offer 3 years free quality warranty service, gives you a warm guarantee in winter!
7. Ditra Heat Cable- Dhehk120134 – Schluter (120 V) Covers 134.3 SF
Description
Schluter-DITRA-HEAT is a modern, advanced under-tile floor heating system. A significant refinement on the underfloor heating systems from the last decade, it is thicker, easier to install, and is entirely waterproof. This is a roll of the heating wire used with the new DITRA-HEAT system. It is designed to be laid into the DITRA-HEAT underfloor tile membrane, and works with DITRA-HEAT thermostats to provide gentle, even heat to the tile it has been laid under. Product Features Strong and Robust Cable Schluter-DITRA-HEAT heating cables are very well manufactured, and have the durability they need to stand the test of time. Versatile Layout The cables can be laid in nearly any layout imaginable inside of the DITRA-HEAT membrane sheets, allowing you to fit your radiant floor perfectly to your tiled room’s layout. No Clips or Fasteners Needed The heating cables lock into the DITRA-HEAT membrane without any other accessories or tools, making clips, fasteners, and other wire stabilizers a thing of the past.
8. Honeywell Manual 4 Wire Premium Baseboard/Line Volt Thermostat(YCT410B1000/U)
Description
Non-programmable electric baseboard thermostat
9. NICREW Pet Heating Pad for Dogs and Cats, Heated Pet Mat with Steel-Wrapped Cord and Soft Fleece Cover
Feature
- Built-in dual thermostat provide optimal comfort temperature for dogs & cats( 96-108℉)
- Washable and removable soft fleece cover provides a warm and cozy surface
- 5 foot steel-wrapped power cord to ensure your pets safety
- Measures 27.5 x 17.5 inches to provide a roomy lounging area for your pet pal
- Recommended for indoor use to provide extra warmth for your pet anytime it is needed
10. Vipe Heater Guard, Reptile Heating Lamp Shade Light Heat Lamp Mesh Cover
Feature
- Mesh lampshade made from high-grade stainless steel, strong enough to guarantee years of usage
- Reptilesand amphibians are more likely to approach to heat source, the metallampshade can protect your turtles, lizards and other crawling pets fromhigh temperature lamp surface
- With coil spring design, easy for installation, just clip and go
- Can be used to hold light bulbs which height is below 16cm/ 6.30″
- Suitable for all kinds reptile lamps, such as heating lamp, ceramic light bulb, spotlight, basking light, etc
Description
Reptile anti-hot heating shade: Various heating lamps: Ceramic heating lights, day lights, night lights,
suitable for bulbs below 16cm (all bulbs)
Feature:
A quality and robust vivarium heat guard by Repstyle.
This guard is designed for simple installation and ease of maintenance.
All our heat guards feature a quick access door for easy bulb changes,
a generous cable for flush mounting and dual spring catches for added safety.
Strong and sturdy
Size: Cylinder Shape:13×16.5 cm/5.12×6.50 inch (Dia.xH)
Installation instructions and use:
1. Put the lamp cover and tighten the four screws
2. Pull the upper part of the spring up to mention, so that the spring is no longer hook the lamp cover.
3. Easy to use, you can open the lid.
Package Includes:
1 Piece Lampshade
Note:Product size is manual measurement, please allow 1-2cm error
Conclusion
By our suggestions above, we hope that you can found Heating Cover For Wire for you.Please don’t forget to share your experience by comment in this post. Thank you!