603 reviews analysed
1. Signswise 200x200mm 12V 220W Silicone Rubber Heating Heater for 3D Printer Heated Beds
2. Signswise 200x200mm 12v 150w Silicone Rubber Heating Heater for 3d Printer Heated Beds
3. Icstation 12V 7W Flexible Polyimide Heater Plate Adhesive PI Heating Film 25mmx50mm (Pack of 4)
Feature
- Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process
- Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
- Equipped with self adhesive can be fixed on the item surface easily, heating films can not control temperature itself.
- Working Voltage: DC 12V, Power: 7W, Film Size: 25 X 50mm/0.98 X 1.97inch(L*W), Maximum Temperature: about 150℃ Ship out by USPS with tracking information and 7-15 days delivery time usually
4. ABN Silicone Heating Pad 120V – 1 x 5 Inch Universal Engine Heater Car Oil Pan Heater Pad, 25W Electric Heater Pad
Feature
- [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 1 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
- [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency
- This reduces wear resulting in increased engine and transmission life
- [Fit Your Application] 1 by 5-inch (2.5 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts
- 72-inch (183cm) power cord ensures maximum reach
- Recommended for metal surfaces only
- Not designed for personal use or on plastic
- [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more
- Clean application surface, peel off paper backing then attach the pad
- Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
- [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads
- Caution – Extremely hot, use thermostat (not included) to regulate temperature
5. Icstation 12V 15W 50X100mm Silicone Heater Rubber Heating Pad Electric Blanket Flexible Mat Constant Temperature 200℃ Max(Pack of 4)
Feature
- Silicone heating pad uses silicone rubber as insulator outside, and the Ni-Cr alloy wire as electric heating element inside, which make it able to be in close contact with the object being heated.
- Icstation heater blanket is thin, lightweight and flexible. With excellent dielectric strength, fast heating and perfect heat transfer efficiency, the rubber heater pad can quickly provide heat to where it is needed.
- The silicone heater mat is convenient and safe to use for its service life is up to four years with thickness of 1.5~2mm and max withstand temperature of 200℃.
- The silicone rubber heater can be used for mixing and heat preservation (oil drum heater) in industrial equipment pipes, tanks, etc., and can be directly wrapped around the surface of the object to be heated when in use.
- Working Voltage: DC 12V, Power: 15W, Mat Size: 50 X 100mm/1.97 X 3.94inch (L*W) ❤We will free resend or refund without returning if our products have any problem. Please feel free to contact us to ask for discount if you are going to order a big deal.
Description
Silicone heating pad uses silicone rubber as insulator outside, and the Ni-Cr alloy wire as electric heating element inside, which make it able to be in close contact with the object being heated.The heater blanket is thin, lightweight and flexible. With excellent dielectric strength, fast heating and perfect heat transfer efficiency, the rubber heater pad can quickly provide heat to where it is needed.
6. High Temperature Ender-3s Flexible 235x235mm Silicone Heater 120V Heated Bed Build Plate Adhesive Backing + Sensor for Creality Ender-3 Ender 5 Ender 3 Pro 3D Printer (120V 500W)
Description
Package: 1piece
Backing:3M adhesive backing
Size: 235mmx235mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control (choose number 1 or 11 in the marlin firmware for the bed temperature sensor).
Power consumption: 500W for 120v and 220v, 300w for 24V .
Attached with two pieces 1.2meter length power wire
7. Abn Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4×5 Inch – 120V 250 Watt
Feature
- KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4×5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature
- Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings
- IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine
- Reduces wear and tear
- Increases engine longevity and extends transmission life
- EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming
- Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence
- sealant not included)
- BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts
- Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity
- Power cord stays attached – not removable
- FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more
- For metal surfaces only – Keep away from plastics
- Caution – Extremely hot, built-in automatic thermostat (not programable) keeps the pad at a constant temperature (once temperature falls below the maximum temperature of 194 F (90 C), it starts heating again)
- Recommended for automotive applications – Not for personal use
Description
Cold temperatures can hinder vehicle lubrication and cause engine and transmission fluids to thicken and poorly circulate. Use the ABN Car Engine Warmer Stick On Oil Pan Heater to let your vehicle start quickly in cold winter months. This engine oil heater transmits heat to 194 degrees Fahrenheit (90 C) to keep the engine oil as a thin fluid, giving you instant lubrication when starting your engine. The battery warmer car pad heater also reduces wear and tear, increases engine longevity, and extends transmission life. Clean the application surface, peel off the paper backing to adhesively attach this silicone heat pad to any metal surface, then plug the 5.75-foot (1.8m) power cord into any wall outlet for instant warming. Once applied, pad remains permanently installed on a metal surface. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
8. Kat’s 24150 150 Watt 4"x 5" Universal Hot Pad Heater
9. 300 X 300mm (Approx. 12" X 12") 120V 750W, KEENOVO Universal Flexible Silicone Heater Mat/Pad, 3D Printer Heated Bed Heating Element
Feature
- Wonderful silicone heater for your 3D printer heat-bed. Fast Heating with 5.2W per square inch.
- surface mount NTC 100K thermistor ( R-T table available)
- 3M adhesive backing offers excellent and easy mounting.
- Versatile and may be used in many other applications.
- Item Location: Shanghai, China
Description
Custom Design Welcome. If you need different heating solution and management, just tell us your requirements/applications and let our flexible thermal pros design for you. Why Keenovo Heaters? As one of the first manufacturers of flexible heaters( Silicone Heaters & Kapton Heaters) in China, we understand that the reliability of our heating elements for your devices,equipment or machines can NEVER be OVER-emphasized, and we offer best quality at reasonable prices with the following promises: a) We use ONLY Arlon silicone rubber substrate imported from the United States and authentic DuPont kapton film in production to provide the best heater performance and the longest serving life, especially at high temperatures or in long time heating process. b) We offer FREE assistance in heater design to achieve an ideal thermal heating solution for your application. A general idea of what you want is enough to turn our flexible heater design experts on working for you. c) Each and every heater is newly made to order and factory-inspected before delivery to you. KEENOVO is your right choice if you are looking for high quality heaters with 100% guarantee.
Conclusion
By our suggestions above, we hope that you can found Silicon Heating Pad 12V for you.Please don’t forget to share your experience by comment in this post. Thank you!
